|
ANTI
SETTLING AGENT FOR SOLVENT BASED SYSTEMS
SPECIFIC PROPERTIES
| |
Appearance
Active substance
Flashing point
Density at (20 °C)
pH |
Clear
liquid
65% (SEM METOD 100)
39-40 °C (SEM METOD 160)
1.010-1.030 g/cm3 (SEM METOD 130)
7±0.5 (SEM
METOD 140) |
CHEMICAL
STRUCTURE
Combination of
special surface active anionic components.
EFFECT
AND THE FIELD OF APPLICATION
Semsol
– N is an effective anti settling agent used in many binder
types.
It is suitable
for the following systems:
-
Every type
of alkyd resin systems
-
Chlorinated
rubber systems
-
Urethane
oil resins which doesn't contain free iso-cianat groups
-
Epoxy
resins
-
Asphalt
and bitum paints
-
Nitrocellulose
lacs
Semsol
– N is NOT suitable for the following systems:
Semsol
– N is used with many pigments and fillers like barit,
calcite, talk, litapon, titan diokside, inorganic and organic. It is not
recommended to use in metalic pigments like alluminium paints and zinc
powder.
Semsol
- N doesn't effect the paints properties like gloss, flow,
drying, stickness. Doesn't affect with the heat formed by pigment
diffusion. As it has an anionic structure, we do not recommend to use
with agents containing cationic structure. It can be used alone or with
surface active substances.
Semsol
– N must be added to the mill base to improve effectiveness.
The addition while producing pigment paste gives the best result.
RECOMMENDED
DOSAGE
It changes
over finished paint between 0.2% and 1% . It isn't recommended to exceed
%1. It is suitable to find the best dosage by starting from the minimum
amount and increase the amount slowly.
STORAGE
SEMSOL
- N can be stored for 1 year at room temperature in a dry place.
PACKAGE
FORM
In 60 kg.
original packages. |
